Nitro Stains

Nitro Stains

nitro stain
Nitro Stain, Distributed by PEA Kenya

This is a high range of  solvent based stains, for interior wooden substrate specially designed to highlight the natural aspect of timber. These stains contain superior binder that enhances the appearance of natural wood, ideally suited for all types of wood, old and new, previously cleaned and sanded. It can be mixed with any kind of solvent based product, nitro product, polyurethane, enamel, acrylic….

  1. Application

…………………………………………………………………………………..12 squre Metres /Liter

The coverage depends on the absorption of the substract and the percentage of dilution.

  1. Application Method

These stains can be applied by hand-held or on-line spray guns, with running spray guns, roller or by immersion.After spray application, the stain can can be wiped off also with line running brushes.

The amount of thinning depends on the color required, type of application, the type of material to be stained (Material shape and size) The choice of thinners depends on the conditions of work, application the time available and need to limit the emission of  Volatile Organic Compound (VOC) into the air.

  1. Dilution

This product can be diluted by with NC thinner, PU thinner or White spirit (Mineral Turpentine. The dilution is related to  the concentration required of the color of the wood. The dilution is in range of 200%.

NOTE: It is ton sugested to mix this stain with NC or PU paint or any other kind of pain.

  1. Drying at 24%

Overspraying (according to the dilution) 10 to 15 minutes. Drying time for these stains depends on the type of application and no guidlines can be given.

  1. Surface Preparation

The surface must be clean, dry and free from paint and varnish, all previous paint surface must be cleaned of the coating by sanding or physical abrasion.

scan0025
Different Colors of Nitro stain, Distributed by PEA Kenya